Improving your bearing core is simple and easy. The steps below will walk you through the process:

NOTE: Use 3 in 1 oil or any house hold oils, NOT COOKING OIL, or for an alternative you could use mechanic grease.

1. Take your spin gear apart.
2. Apply a little oil or grease to the bearing core shaft and a little bit to the bearing.
3. Put the spin gear back together and reassemble the whole blade.

NOTE: Clean greased or oiled parts after every two or three days. As grease and oil collect dust which will clog up the bearing and frame, this will then lead to your spin gear becoming of no use.

By greasing or oiling your Bearing Core your spin will increase, therefore giving you an edge in battle